Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Our Steel Products
Wire Mesh : 4mm – 10 mm ASTM 497,BS 4483 and SASO
 
Welded "Wire Mesh" is made of high quality steel wire through automatic process and sophisticated welding technique
 
wire mesh Diameter of wire 4mmto 12 mm
Sheet Length Max 6.0 Mtrs and Min 2.0 Mtrs
Sheet width Max 2.75 Mtrs and Min 1.0 Mtrs
Spacing 100 MM, 150 MM, 200 MM
Production Capacity 5600 Tons/ Month
Standards ASTM A-497, B.S. 4483, DIN 488, SASO 224
 
Advantages:

The benefit & advantages of "Cut & Bend"

• Excellent Quality control, spacing between Steel Wire is Machine controlled, thus eliminating human error.
• Quick response time for standard sizes.
• Pay only what you need, and save on storage space.

Welded Wire Mesh is produced on fully computerized machines and delivers to site, just in Time
 

ASTM A82 / A82M

This specification covers as cold-drawn or galvanized steel wires to be used as such, or in fabricated form, for the reinforcement of concrete. The steel shall be made by one of the following processes: open-hearth, electric furnace, or basic-oxygen. The wires shall be cold drawn from rods that have been hot rolled from billets. The tests described include tension, bending, and reduction of area tests. After undergoing tension test, the tensile and yield strength properties of the test specimen shall conform to the requirements of a reference material based on nominal area of the wire. The specimen for bend test shall withstand being bent at room temperature without cracking on the outside of the bent portion. The reduction of area shall be determined as described in a reference document.