Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Our Steel Products
CUT & BEND : ASTM - A775M GRADE - 60 & ASTM - A615 GRADE - 60
 
Our company is capable to provide pre cut & bent steel reinforcement in Deformed Black steel rebar and Epoxy Coated steel rebar. We are having the facility of providing Stirrups, Z-shaped, L-shaped, U-shaped items, hooks, chairs, rings and spirals.

Diameters used for Cut & Bent are as under:
 
wire mesh Cut & Bend Rebar's 8 mm to 32mm
Stirrup 5 mm to 16mm
Spiral Rings 8 mm to 32mm
Production Capacity 15,000 MT/ Month (Dammam/Jeddah)
Standards A 315, A-934M, BS4466 & BS 8666
 
Cut & Bend has "Great Advantages" which really help to fasten the project pace.

• No Stock of rebar required at site.
• No cutting and bending Machinery required on site.
• Control of material wastage.
• Cut and Bent to Exact Specifications for Quick onsite installation.
• Delivery of any Quantity and Size at Site when needed.
• Saving of electricity and nil exposure to Human error at site.
 

ASTM A82 / A82M

This specification covers as cold-drawn or galvanized steel wires to be used as such, or in fabricated form, for the reinforcement of concrete. The steel shall be made by one of the following processes: open-hearth, electric furnace, or basic-oxygen. The wires shall be cold drawn from rods that have been hot rolled from billets. The tests described include tension, bending, and reduction of area tests. After undergoing tension test, the tensile and yield strength properties of the test specimen shall conform to the requirements of a reference material based on nominal area of the wire. The specimen for bend test shall withstand being bent at room temperature without cracking on the outside of the bent portion. The reduction of area shall be determined as described in a reference document.