Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Our Steel Products
Black Rebar : 8-32mm ASTM- A615, Grade - 60
 
Concrete is a material that is relatively weak in tension. To compensate for this imbalance in concrete's behavior, REBAR is cast into it to carry the tensile loads.

It is usually in the form of carbon steel bars or wires, and the surfaces may be deformed for a better bond with the concrete.

Rebar is available in different grades and specifications that vary in yield strength, ultimate tensile strength, chemical composition, and percentage of elongation.
 
Deform Rebar   Deform Rebar   Deform Rebar   Deform Rebar
 
Specification
Size 08mm to 32 mm
Length Up to 12 Meters
Standards ASTM- A615, Grade – 60
Delivering Capacity 7,000 – 15,000 Tons / Month
The grade designation is equal to the minimum yield strength of the bar in ksi (1000 psi) for example grade 60 rebar has minimum yield strength of 60 ksi. Rebar is typically manufactured in grades 40, 60, and 75.
 

ASTM A82 / A82M

This specification covers as cold-drawn or galvanized steel wires to be used as such, or in fabricated form, for the reinforcement of concrete. The steel shall be made by one of the following processes: open-hearth, electric furnace, or basic-oxygen. The wires shall be cold drawn from rods that have been hot rolled from billets. The tests described include tension, bending, and reduction of area tests. After undergoing tension test, the tensile and yield strength properties of the test specimen shall conform to the requirements of a reference material based on nominal area of the wire. The specimen for bend test shall withstand being bent at room temperature without cracking on the outside of the bent portion. The reduction of area shall be determined as described in a reference document.